Products
PCTFE, polychlorotrifluoroethylene
PCTFE has very good mechanical properties, e.g. compression and creep strength with little deformation under load. The melting point and maximum service temperature are lower than for some other fluoroplastics, but the mechanical properties are unchanged even at cryogenic temperatures. PCTFE has exceptional barrier properties and the lowest permeability for water vapour of all plastics. It is attacked only by a few halogenated hydrocarbons and aromatic solvents.
- POM, polyoxymethylene, polyacetal
- PC, polycarbonate
- PET, polyethylene terephtalate (PET-P)
- PBT, polybutylene terephtalate
- PET-G, polyethylene terephtalate, glycole modified
- PA, polyamide (Nylon)
- PPO, polyphenylene oxide
- ABS, acrylnitrile-butadiene-styrene terpolymer
- PC/ABS, polycarbonate/ABS blend
- HIPS, high impact polystyrene
- PS-XL, cross-linked polystyrene
- PEEK, polyetheretherketone
- PPS, polyphenylene sulphide
- PAI, polyamideimide
- PBI, polybenzimidazole
- PSU, polysulfone
- PES, polyethersulfone
- PEI, polyether imide
- PPSU, Polyphenylenesulfone
- PMP, polymethyl pentene
- COC, cycloolefin copolymer
- PTFE, polytetraflouro ethylene (Teflon)
- ETFE, poly(ethylene-tetrafluoroethylene)
- ECTFE, poly(ethylene-chlorotrifluoroethylene)
- PCTFE, polychlorotrifluoroethylene
- FEP, poly(hexafluoropropylene-tetrafluoroethylene)
- PFA, poly(tetrafluoro ethylene-perfluoroalkylvinylether)
- PVDF, polyvinylidene flouride
- PMMA, polymethyl methacrylate (Plexiglas)
- PE, polyethylene
- PP, polypropylene
- PVC, polyvinyl chloride
- C-PVC, overchlorinated PVC
- Film, various materials
- PF, Phenolics (bakelite)
- Epoxy, epoxy laminates
- Silicone, silicone glass fabric laminate
- Polyimide, polyimide glass fabric laminate
- Polyester, polyester glass roving laminate
- PUR, polyurethane
- Si-rubber, Silicone rubber